Skip to content
Snippets Groups Projects
Commit 9bcd945c authored by Stephen D's avatar Stephen D
Browse files

make flashing instructions a bit clearer

parent 36cd5ae3
No related branches found
No related tags found
No related merge requests found
Hide whitespace changes
Inline Side-by-side
Showing
with 2 additions and 2 deletions
README.md
+ 2
− 2
View file @ 9bcd945c
...@@ -71,7 +71,7 @@ brew install dfu-util ...@@ -71,7 +71,7 @@ brew install dfu-util
3. Put the transceiver into firmware flashing mode: 3. Put the transceiver into firmware flashing mode:
1. Connect the board to your computer via USB 1. Connect the board to your computer via USB
2. Hold down the `flash` button 2. Hold down the `flash` button
3. Press the `reset` button 3. Momentarily press the `reset` button
4. Release the `flash` button 4. Release the `flash` button
5. The red LED will come on, then go off. If it stays on, it means your computer isn’t communicating with the board for some reason. Check your cable! 5. The red LED will come on, then go off. If it stays on, it means your computer isn’t communicating with the board for some reason. Check your cable!
4. Flash the firmware: 4. Flash the firmware:
...@@ -108,7 +108,7 @@ sudo udevadm control --reload-rules && sudo udevadm trigger ...@@ -108,7 +108,7 @@ sudo udevadm control --reload-rules && sudo udevadm trigger
### Board setup ### Board setup
1. Connect the board to your computer via USB 1. Connect the board to your computer via USB
2. Hold down the `flash` button 2. Hold down the `flash` button
3. Press the `reset` button 3. Momentarily press the `reset` button
4. Release the `flash` button 4. Release the `flash` button
The red LED will come on, then go off. If it stays on, it means your computer isn't communicating with the board for some reason. Check your cable! The red LED will come on, then go off. If it stays on, it means your computer isn't communicating with the board for some reason. Check your cable!
......
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment